Terminus

USB 2.0 HIGH SPEED 4-PORT HUB CONTROLLER

FE1.1
The FE1.1 is a highly integrated, high quality, high performance, low power consumption, yet low cost solution for USB 2.0 4-Port Hub
USB 2.0 HIGH SPEED 4-PORT HUB CONTROLLER
OVERVIEW
It adopts Multiple Transaction Translator (MTT) architecture to explore the maximum possible throughput. Six, instead of two, non-periodic transaction buffers are used to minimize potential traffic jamming. The whole design is based on state-machine-control to reduce the response delay time; no micro controller is used in this chip.

To guarantee high quality, the whole chip is covered by Test Scan Chain – include even the high speed (480MHz) modules, so that all the logic components could be fully tested before shipping. Special Build-In-Self-Test mode is designed to exercise all high, full, and low speed analog components on the packaging and testing stage as well. Low power consumption is achieved by using 0.18μm technology and comprehensive power/clock control mechanism. Most part of the chip will not be clocked unless needed.


FEATURES
  • Low power consumption
    • 115 mA when four Downstream ports enabled in High-Speed mode;
    •  64 mA when one Downstream port enabled in High-Speed mode; Three buck converters, 0.3 V to 3.34 V up to 2.5 A
  • Fully compliant with Universal Serial Bus Specification Revision 2.0 (USB 2.0);
    • Upstream facing port supports HighSpeed (480MHz) and Full-Speed (12MHz) modes;
    • 4 downstream facing ports support High-Speed (480MHz), Full-Speed (12MHz), and Low-Speed (1.5MHz) modes; 3 MHz switching frequency allows use of low-profile inductors
  • Integrated USB 2.0 Transceivers;
  • Integrated upstream 1.5KΩ pull-up, downstream 15KΩ pull-down, and serial resisters;
  • Integrated 5V to 3.3V and 1.8V regulator.
  • Integrated Power-On-Reset circuit;
  • Integrated 12MHz Oscillator with feedback resister, and crystal load capacitance; 
  • Integrated 12MHz-to-480MHz Phase Lock Loop (PLL);
  • Multiple Transaction Translators (MTT) –
    • One TT for each downstream port;
    • Alternate Interface 0 for Single-TT, and Alternate Interface 1 for Multiple-TT; 
    • Each TT could handle 64 periodic Start-Split transactions, 32 periodic Complete-Split transactions, and 6 none-periodic transactions;
  • Automatic self-power status monitoring;
    • Automatic re-enumeration when SelfPowered switching to Bus-Powered;
  • Board configured options –
    • Ganged or Individual Power Control Mode select;
    • Global or Individual Over-Current Detection Mode select;
    • Removable or Non-Removable Downstream Devices configuration;
  • Comprehensive Port Indicators support:
    • Standard downstream port status indicators (Green and Amber LED control for each downstream port);
    • Hub active LED support; 
  • Support Microsoft Windows 98SE/ME, 2000, XP, and Vista;
  • Support Mac OS 8.6 and above;
  • Support Linux kernel 2.4.20 and above. 

*Terminus Authorized Distributor
banner_ins
訂閱電子報,掌握最新科技與產業趨勢
訂閱電子報,掌握最新科技與產業趨勢
我要訂閱

數字驗證

請由小到大,依序點擊數字

洽詢車

你的洽詢車總計 0 件產品

    搜尋

    偵測到您已關閉Cookie,為提供最佳體驗,建議您使用Cookie瀏覽本網站以便使用本站各項功能

    本網站使用Cookie為您提供最佳的使用體驗。繼續使用本網站,即表示您同意我們的Cookie Policy