Kingston Technology

Memory Module


KSM32RS8/16MER
Kingston's KSM32RS8/16MER is a 2G x 72-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM) registered w/parity, 1Rx8, ECC, memory module, based on nine 2G x 8-bit FBGA components.
Memory Module
KSM32RS8/16MER
16GB 1Rx8 2G x 72-Bit PC4-3200
CL22 Registered w/Parity 288-Pin DIMM

Kingston's KSM32RS8/16MER is a 2G x 72-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM) registered w/parity, 1Rx8, ECC, memory module, based on nine 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES
• Power Supply: VDD = 1.2V
• VDDQ = 1.2V
• VPP = 2.5V
• VDDSPD = 2.41V to 2.75V
• Functionality and operations comply with the DDR4 SDRAM datasheet
• 16 internal banks
• Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available
• Data transfer rates: PC4-3200, PC4-2933, PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Supports ECC error correction and detection
• On-Die Termination (ODT)
• Temperature sensor with integrated SPD
• This product is in compliance with the RoHS directive.
• Per DRAM Addressability is supported
• Internal Vref DQ level generation is available
• Write CRC is supported at all speed grades
• CA parity (Command/Address Parity) mode is supported


 
Subscribe to EDOM TECH Newsletter Subscribe!
Subscribe
to Newsletter
© 2018 EDOM Technology. All Rights Reserved.
This website uses Cookie to provide you with the best experience. By continuing to use our website, you consent to our Cookie Policy.
ACCEPT