Subscribe to EDOM TECH Newsletter
STMicroelectronics
STM32F439II | ARM Cortex-M4 MCU
STM32F439II
High-performance advanced line, Arm Cortex-M4 core with DSP and FPU, 2 Mbytes of Flash memory, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, TFT, HW crypto
Description
Low power The STM32F437xx and STM32F439xx devices are based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 180 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
The STM32F437xx and STM32F439xx devices incorporate high-speed embedded memories (Flash memory up to 2 Mbyte, up to 256 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.
All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers, a true random number generator (RNG) and a cryptographic acceleration cell. They also feature standard and advanced communication interfaces.
All Features
1. Core
Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
2. Memories
Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
2. Memories
-
Up to 2 MB of Flash memory organized into two banks allowing read-while-write.
-
Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM.
-
Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, Compact Flash/NOR/NAND memories.
3. LCD parallel interface, 8080/6800 modes
4. LCD-TFT controller with fully programmable resolution (total width up to 4096 pixels, total height up to 2048 lines and pixel clock up to 83 MHz)
5. Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
6. Clock, reset and supply management
4. LCD-TFT controller with fully programmable resolution (total width up to 4096 pixels, total height up to 2048 lines and pixel clock up to 83 MHz)
5. Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
6. Clock, reset and supply management
-
1.7 V to 3.6 V application supply and I/Os
-
POR, PDR, PVD and BOR
-
4-to-26 MHz crystal oscillator
-
Internal 16 MHz factory-trimmed RC (1% accuracy)
-
32 kHz oscillator for RTC with calibration
-
Internal 32 kHz RC with calibration
-
Sleep, Stop and Standby modes
-
VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM
7. 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
8. 2×12-bit D/A converters
9. General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
10. Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
11. Debug mode
8. 2×12-bit D/A converters
9. General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
10. Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
11. Debug mode
-
SWD & JTAG interfaces
-
Cortex-M4 Trace Macrocell™
12. Up to 168 I/O ports with interrupt capability
-
Up to 164 fast I/Os up to 90 MHz
-
Up to 166 5 V-tolerant I/Os
13. Up to 21 communication interfaces
-
Up to 3 × I2C interfaces (SMBus/PMBus)
-
Up to 4 USARTs/4 UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
-
Up to 6 SPIs (45 Mbits/s), 2 with muxed full-duplex I2S for audio class accuracy via internal audio PLL or external clock
-
1 x SAI (serial audio interface)
-
2 × CAN (2.0B Active) and SDIO interface
14. Advanced connectivity
-
USB 2.0 full-speed device/host/OTG controller with on-chip PHY
-
USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
-
10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
15. 8- to 14-bit parallel camera interface up to 54 Mbytes/s
16. Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, Triple DES, HASH (MD5, SHA-1, SHA-2), and HMAC
17. True random number generator
18. CRC calculation unit
19. RTC: subsecond accuracy, hardware calendar
20. 96-bit unique ID
16. Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, Triple DES, HASH (MD5, SHA-1, SHA-2), and HMAC
17. True random number generator
18. CRC calculation unit
19. RTC: subsecond accuracy, hardware calendar
20. 96-bit unique ID
*STMicroelectronics Authorized Distributor
