Subscribe to EDOM TECH Newsletter
TDK InvenSense
ICP-20100 - Pressure & Temperature Sensor IC
ICP-20100
High Accuracy, Low Power, Barometric Pressure and Temperature Sensor IC
DescriptionFeaturesApplicationsData Sheet
The ICP-20100 pressure sensor provides a high-accuracy, low power, barometric pressure and temperature sensor solution, that integrates a capacitive pressure sensor for monitoring pressure changes in the range of 30 to 110 kPa.
The ICP-20100 integrates a DSP module for on-chip calibration with an Analog-to-Digital converter (ADC), digital filtering, a FIFO and has I²C, I3CSM, and SPI interfaces available. The solution can be configured to achieve ultra-low noise or ultra-low power performance and is flexible to perform anywhere in-between. Additionally, the filters can be enabled to allow even lower noise performance or activate features such as filtering of pressure glitches (e.g. opening/closing a window).
The ICP-20100 is available in a closed package with a vent hole.
*TDK InvenSense Authorized Distributor
The ICP-20100 integrates a DSP module for on-chip calibration with an Analog-to-Digital converter (ADC), digital filtering, a FIFO and has I²C, I3CSM, and SPI interfaces available. The solution can be configured to achieve ultra-low noise or ultra-low power performance and is flexible to perform anywhere in-between. Additionally, the filters can be enabled to allow even lower noise performance or activate features such as filtering of pressure glitches (e.g. opening/closing a window).
The ICP-20100 is available in a closed package with a vent hole.
- Digital-output pressure and temperature sensors, with programmable output: all-pressure, alltemperature or pressure & temperature
- Programmable noise performance down to 0.5 Parms through programmable Oversampling Ratio (OSR)
- Digital filtering for pressure signals
- Finite Impulse Response (FIR) filter for improved noise performance
- Infinite Impulse Response (IIR) filter for e.g. filtering of pressure glitches
- Package dimensions 2x2x0.8 mm (10-pin LGA)
- 96-byte FIFO buffer enables the application processor to read up to 16 pressure-temperature pairs in a burst
- User-programmable Interrupt
- Host interface: 12 MHz SPI/1 MHz I2C/12.5 MHz I3CSM
- Temperature operating range: -40°C to 85°C
- Main Supply voltage: 1.8V ±10% or 3.3V ±10%
- I/O supply voltage externally applied (1.2V ±10%, 1.8V ±10% or 3.3V* ±10%) *available only when main supply voltage equals 3.3V ±10%
- RoHS and Green compliant
- Smartphones and Tablets
- Wearable Sensors
- Home and Building Automation
- Weather Stations
*TDK InvenSense Authorized Distributor
